PIC24HJ64GP510A-E/PT PIC24H 16-bit device family employs a powerful
16-bit architecture IC integrated circuit IC
16-bit Microcontrollers (up to 256 KB Flash and 16 KB SRAM) with
Advanced Analog
--PIC24HJXXXGPX06A/X08A/X10A
The PIC24H 16-bit device family employs a powerful 16-bit
architecture, ideal for applications that rely on high-speed,
repetitive computations, as well as control. The devices are pin
compatible with the dsPIC33F family of devices, and share a very
high degree of compatibility with the dsPIC30F family devices. This
allows seamless migration options from/to PIC24F, dsPIC30F and
dsPIC33F devices.
Operating Conditions
Up to 40 MIPS operation
3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
High-Efficiency PIC24H core
Code-efficient (C and Assembly) architecture
Single-cycle mixed-sign MUL plus hardware divide
16 x 16 multiply operations
32/16 and 16/16 divide operations
Up to ±16-bit data shifts
Clock Management
±2% internal oscillator
Programmable PLLs and oscillator clock sources
Fail-Safe Clock Monitor (FSCM)
Independent Watchdog Timer (WDT)
Fast wake-up and start-up
Power Management
On-chip 2.5V voltage regulator
Low-power management modes (Sleep, Idle, Doze)
Integrated Power-on Reset and Brown-out Reset
1.35 mA/MHz dynamic current (typical)
55 µA IPD current (typical) Advanced
Analog Features
Two ADC modules: Configurable as 10-bit, 1.1 Msps with four S&H
or 12-bit, 500 Ksps with one S&H,
18 analog inputs on 64-pin devices and up to 32 analog inputs on
100-pin devices
Flexible and independent ADC trigger sources
Timers/Output Compare/Input Capture
Up to nine 16-bit timers/counters. Can pair up to make four 32-bit
timers
Eight Output Compare modules configurable as timers/counters
Eight Input Capture modules
Communication Interfaces
Two UART modules (10 Mbps) - With support for LIN 2.0 protocols and
IrDA®
Two 4-wire SPI modules (15 Mbps)
Up to two I2C™ modules (up to 1 Mbaud) with SM Bus support
Enhanced CAN (ECAN) module (1 Mbaud) with 2.0B support
Data Converter Interface (DCI) module with I2S codec support
Input/Output
Sink/Source up to 10 mA (pin specific) for standard VOH/VOL, up to
16 mA (pin specific) for nonstandard VOH1
5V-tolerant pins
Selectable open drain, pull-ups, and pull-downs
Up to 5 mA overvoltage clamp current
External interrupts on all I/O pins
Debugger Development Support
In-circuit and in-application programming
Two programs and two complex data breakpoints
IEEE 1149.2-compatible (JTAG) boundary scan
Trace and run-time watch
Specification:
Category | Interface - Drivers, Receivers, Transceivers |
Mfr | |
Series | |
Part Status | |
| Architecture | 16 |
| MaxSpeed (MHz) | 120 |
| CPU Speed (MIPS/DMIPS) | 30 |
| Program Memory Size (KB) | 132 |
| Multiple Flash Panels | False |
| Temp. Range Min. | -40 |
| Temp. Range Max. | 125 |
| Operation Voltage Min.(V) | 2.5 |
| Operation Voltage Max.(V) | 5.5 |
| Pin Count | 64 |
| Low Power | No |
| Number of Comparators | 0 |
| Number of ADCs | 1 |
| ADC Channels | 16 |
| Max ADC Resolution (bits) | 12 |
| Max ADC Sampling Rate (ksps) | 200 |
| Number of DACs | 0 |
| DAC outputs | 0 |
| Max DAC Resolution (bits) | 0 |
| Hardware RTCC | No |
| Motor Control PWM Channels | 0 |
| SMPS PWM Channels | 0 |
| Number of PWM Time Bases | 1 |
| Output Compare Channels | 8 |
| USB Interface | None |
| Number of CAN Modules | 2 |
| Type of CAN module | CAN |
| Crypto Engine | No |
| Quadrature Encoder Interface (QEI) | 0 |
| Segment LCD | 0 |
| LCD/Graphics Interface | No |
| Configurable Logic Cell Modules (CLC /CCL) | 0 |
| Peripheral Pin Select (PPS)/Pin Muxing | No |
Environmental & Export Classifications
| ATTRIBUTE | DESCRIPTION |
|---|
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| REACH Status | REACH Unaffected |
| ECCN | 3A991B1A |
| HTSUS | 8542.32.0071 |
More 16-bit PIC MCU and DSC Microchip Part number:
PIC24HJ64GP510A-E/PT PIC24H 16-bit device family employs a powerful
16-bit architecture IC Marking:
